2 fan controllers on a saturn switch

Is it possible to have 2 fan controllers on different buttons on a saturn switch. Whenever you select a blank scene to use the fan cycle option it states that that trigger will be the same for all scenes on that switch.Do we need to use an EDLT? or can it be done with some sort of logic.
Thanks

 

Unfortunately the way it has been designed you can only have a single fan controller on a saturn/neo/dlt. If you have any scenes you can't even have a single fan controller. I believe the eDlt supports multiple fan controllers but I have not tried it.

You can certainly use logic to operate multiple fans from a single switch. Create a ga for the fan switch and set it to preset 100%. In logic, if the ga goes to 100% trigger the appropriate fan controller action selector then set the switch ga back to 0.

If you want labels it's a bit more complicated

 

Thanks for reply
Yes it is easy to do in an EDLT so maybe that might be the way to go

 

Check out this thread if you do want to go down the logic path - https://www.cbusforums.com/threads/multiple-fan-zones-from-one-saturn-5-button-dlt.6755/

 

Thanks for info