C-Bus Forums  

Go Back   C-Bus Forums > C-Bus Products > Multi-Room Audio (MRA) and MARPA

The C-Bus Community Forums is place where C-Bus users can share information and help others with C-Bus. From time to time you will see Clipsal staff on the forums, but this is not an official support channel. If you really need help contact the official support services of Clipsal. More information about the purpose of this forum is available here.

Reply
 
Thread Tools Display Modes
  #1  
Old 31 Jul 17, 06:18 PM
hugert1 hugert1 is offline
New Member
 
Join Date: Nov 2015
Location: cape town
Posts: 5
Default Matrix 3xx Tuners not changing presets

Hope you can suggest some help here , maybe I am doing it wrong , not sure , we donít usually setup the tuners , but in this case the client requested to have fm radio working

When configuring presets on the fm tuners in the MARPA software the following does not happen .
You cannot get the tuners to change between presets from a touch screen or from a DLT switch .

Here is how it is currently setup

verison 3x ( black case ) matrix

Under the tuners tab in marpa 4 presets have been setup .
Under the sources tab at the tuner 1 page the following has been setup . Dynamic 1 = Media control . Dynamic function = NextSelection(tuner preset)

Media link group = created a group called it Ė tuner1presets next

Done the same for tuner 2

Now in the piced software open the ctouch mark 2 project file and configured a button as follows .
under the system io tab key function = preset system io variable = inbuilt media transport control fast forward
value = 1 media link group = tuner 1 presets next

no luck here , does not set tuner to next preset .
is there perhaps another way of doing this ?


also tried setting it up on a DLT switch but you cannot set 2 different applications (lighting and mtp ) on the same switch , I need to investigate this method a bit further , perhaps you have done this before and know of a workaround .

please advise
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Programming Multiple Matrix Switchers Thomas Multi-Room Audio (MRA) and MARPA 2 17 Aug 13 03:22 AM
What's Missing? Conformist General Discussion 139 14 Dec 12 05:26 PM


All times are GMT +10.5. The time now is 05:58 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.