c-bus interface with ness D16X

[Klink]

Joshi, your the man. That worked a treat.Thanks heaps for that. It's always the red wire lol.
One other question. Is there a way when u disarm in alarm state to get the lights to turn off? It seems 98 works when in disarm mode only. One option I suppose is to assign to a wall button to all off.

[joshl]

Glad you solved it Depends are you setting one individual group address on then off for the alarm state? (In the cbus supplement booklet) that comes with the panel with the interface it should have a whole lot of commands where you can set your ramp time group address and for how long. This works great for group addresses.... If you have a set of lights you require to be on you can use a scene for those lights and pulse the groups for the period of time

so it would be something like.....

P151E 98 (disarm) 2 (trigger control instead of lighting) 15( trigger max) 000 (group address) E

So on a disarm the panel sets the scene via the trigger group address.

hope that makes sense?

[Klink]

unfortunately mate the trigger control function does not work with the pulse function or any timer.Its N/A on the manual and tried it too. Ill just use the Lighting application and and set a timer

[joshl]

sorry i realised what I did with mine..... I had a ctouch there and stored the scene on there allowing the pulse times to work. So if you have one that is an option to get it going