Wiser constantly losing connection

[7iron]

Originally Posted by 7iron

Thanks Colin

I believe that is what is happening ..... it stops after running a specific schedule. In the process of nailing it down and will respond with the other info once I've done some more testing.

The schedule runs every 3 days.

I deleted the schedules and recreated them. So far its not losing the connection.

[kjayakumar]

Originally Posted by saintjerome

By the way, when will v1.14 of the firmware be released? I noticed you have this version running.

Hi there,

You may have already spotted Conformist's post here, http://www.cbusforums.com/forums/sho...9712#post29712 about the major software update to the Clipsal installation software that should be, if all goes well, fingers crossed, out on Monday or a few days after.

But I'm worried that the firmware update won't fix the issue that you've observed. My understanding is that the only schedule related fix in this upcoming release had to do with schedule editing which I don't think is the issue that you've seen. If possible, please pass Clipsal your project so that the developers will have an opportunity to reproduce the issue. Normally, once a problem has been reproduced it is a fairly straightforward step to getting it solved properly.

[DmitryShu]

Internet connection is a PPPoE over the WAN port.
With Wiser's WiFi to connect my laptop to the Internet and GUI - everything works great!
But after a few hours wiser's logic stops and lost internet connection.
When you try to connect to Wiser GUI responds "Unable to Connect to Wiser".
After reboot everything works stable again only a few hours!
I am confident in the quality of work internet connection at the entrance to the WAN port Wiser.
In what could be the halting problem of logic and loss of Internet?

IP wiser: 192.168.0.2
IP CNI: 192.168.0.3
DHCP enabled 192.168.10-20
C-Bus Toolkit 1.11.0 15 FEB 2010
PICED 4.8.1 19 FEB 2010

[kjayakumar]

Hi Dmitry,

Just to confirm, you are using PICED 4.8.1 so your Wiser firmware is 1.15.0 right?

I would also check that upnp is disabled (under Administration tab). If you are running a torrent client behind it, then you may want to limit the number of maximum peers it is using to less than 200.

[DmitryShu]

Yes, indeed - firmware_1_15_0.img and PICED 4.8.1 19 FEB 2010

By the way, when you try to connect to the problem emerges Wiser
http://www.cbusforums.com/forums/sho...ght=wiser+skin
This is when I decided to help replacing skin_definition.xml Version 4.8.1 of the draft versions Version 4.6.1 - then everything works!
Could this affect the operation of logic and the Internet?

[kjayakumar]

Originally Posted by DmitryShu

Yes, indeed - firmware_1_15_0.img and PICED 4.8.1 19 FEB 2010

Just to double check, because I'm not sure how the skin could affect it that way, can you paste what info is presented by the Wiser's page on:
http://192.168.0.2/clipsal/main.htm