PDA

View Full Version : PICED wont work for me :(

Rolecgroup
23 Apr 05, 09:50 PM
I know its BETA, but as i've moved to Toolkit and the latest Homegate i thought i use PICED for my CTouch.

Also cant seem to get CBusV2 to work anymore so had no choice....

BUT i cant get it to work - everytime i try to prepare for transfer get this :-

--------------------------------------------------------------------------------
TITLE
--------------------------------------------------------------------------------
Application Error
--------------------------------------------------------------------------------
USER COMMENTS
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
CUSTOM INFO
--------------------------------------------------------------------------------
Software Version = 2.6.1
Software Build = 0

--------------------------------------------------------------------------------
ERROR MESSAGE
--------------------------------------------------------------------------------
Exception 'ERangeError' in module PICED.exe at 0045180B
Range check error

Module: DownLoad, Source: DownLoad.pas, Line 1596
Procedure: Download.PrepareMemoryImage
--------------------------------------------------------------------------------
CALL STACK
--------------------------------------------------------------------------------
Call stack:
:0085280B [PICED.exe] Download.PrepareMemoryImage (DownLoad.pas, line 1596)
:7C59BBF3 [kernel32.dll]
Recursive call (4 times):
:0085280B [PICED.exe] Download.PrepareMemoryImage (DownLoad.pas, line 1596)
:00403100 [PICED.exe] System.Error (system.pas, line 1336)
:004086B8 [PICED.exe] (assign.asm, line 131)
:00408673 [PICED.exe] (assign.asm, line 69)
:00408670 [PICED.exe] (assign.asm, line 56)
:0085479D [PICED.exe] Download.PrepareMOTDownloadFile (DownLoad.pas, line 2152)
:0087E26F [PICED.exe] Main.TMainForm.PrepareMOTDownloadFileItemClick (MAIN.PAS, line 5132)
:004638EE [PICED.exe] Menus.TMenuItem.Click (Menus.pas, line 1740)
:00464F90 [PICED.exe] Menus.TMenu.DispatchCommand (Menus.pas, line 2446)
:0046F3A2 [PICED.exe] Forms.TCustomForm.WMCommand (Forms.pas, line 4032)
:0045084E [PICED.exe] Controls.TControl.WndProc (Controls.pas, line 4227)
:00453EFF [PICED.exe] Controls.TWinControl.WndProc (Controls.pas, line 5731)
:00470D50 [PICED.exe] Forms.TCustomForm.CMActionUpdate (Forms.pas, line 4848)
:0045084E [PICED.exe] Controls.TControl.WndProc (Controls.pas, line 4227)
:00453EFF [PICED.exe] Controls.TWinControl.WndProc (Controls.pas, line 5731)
:0046CD6B [PICED.exe] Forms.TCustomForm.WndProc (Forms.pas, line 3063)
:77E14D28 [user32.dll]
Recursive call (2 times):
:0046CD6B [PICED.exe] Forms.TCustomForm.WndProc (Forms.pas, line 3063)
:00434EF9 [PICED.exe] Graphics.FreeMemoryContexts (Graphics.pas, line 4566)
:0041862F [PICED.exe] Classes.TThreadList.UnlockList (Classes.pas, line 2125)
:77E1A366 [user32.dll]
:6E421990 [INDICDLL.dll]
:77E31E4F [user32.dll]
:77E1A74B [user32.dll]
:0046CD6B [PICED.exe] Forms.TCustomForm.WndProc (Forms.pas, line 3063)
:0041862F [PICED.exe] Classes.TThreadList.UnlockList (Classes.pas, line 2125)
:00434EF9 [PICED.exe] Graphics.FreeMemoryContexts (Graphics.pas, line 4566)
:00453A47 [PICED.exe] Controls.TWinControl.MainWndProc (Controls.pas, line 5612)
:00469842 [PICED.exe] Forms.StdWndProc (Forms.pas, line 1459)
:77E3A420 [user32.dll]
:77E16B41 [user32.dll]
:77E25073 [user32.dll]
:717521F0 [comctl32.dll]
:7175276F [comctl32.dll]
:71752574 [comctl32.dll]
:7172C11B [comctl32.dll]
:7175276F [comctl32.dll]
:71752643 [comctl32.dll]
:77E3A420 [user32.dll]
:77E14605 [user32.dll]
:00438FF7 [PICED.exe] Contnrs.TObjectList.GetItem (Contnrs.pas, line 167)
:00439247 [PICED.exe] Contnrs.TComponentList.GetItems (Contnrs.pas, line 237)
:77E15B77 [user32.dll]
:004741F1 [PICED.exe] Forms.TApplication.ProcessMessage (Forms.pas, line 6630)
:00474238 [PICED.exe] Forms.TApplication.HandleMessage (Forms.pas, line 6649)
:004744BE [PICED.exe] Forms.TApplication.Run (Forms.pas, line 6732)
:004744E2 [PICED.exe] Forms.TApplication.Run (Forms.pas, line 6736)
:0092458E [PICED.exe] initialization (TSConfig.DPR, line 129)
:7C59893D [kernel32.dll]

--------------------------------------------------------------------------------
REGISTERS
--------------------------------------------------------------------------------
Main Thread ID = 000003F0, Current Thread ID = 000003F0
Registers:
EAX = 0012F40C CS = 001B EIP = 7C59BBF3 Flags = 00000202
EBX = 01CD0A38 SS = 0023 ESP = 0012F404 EBP = 0012F45C
ECX = 00000000 DS = 0023 ESI = 0012F490 FS = 003B
EDX = 0085280B ES = 0023 EDI = 0012F43C GS = 0000
Code at CS:EIP
5F 5E C9 C2 10 00 8B 4C 24 04 A1 F0 A1 5C 7C 89
Stack:
00000111 01BF0F94 0EEDFADE 00000001 00000000
00000000 00000000 00000000 00000000 7C59893D
01CD0E05 0254162C 00403C0B 01D71EEC 0042AF0B
00000000 02589B88 7C59893D FFFFFFFF FFFFFFFF




Currently knackered now as i cant go back to CbusV2 to setup the CTouch, also have noticed that Toolkit does not recognise the Ctouch as a Ctouch, only as a PC Interface, so have to connect to CTouch by COM1 Serial.

Also noticed in PICED that only AUstralia is available in location choice.

Help please !!!

Currently have no lights in my nice new Garden Room :(

Dean.
ashleigh
23 Apr 05, 10:46 PM
Sorry - onday in Oz is a public holiday - so you might not get an answer for another 3 or 4 days.....
darrenblake
24 Apr 05, 09:09 AM
Could the problems your experiencing be the reason why CIS have put in large red font on the PICED download site that it should not be used on job sites. From experience BETA software is best left on the test bench, not on the job site
Rolecgroup
25 Apr 05, 04:41 AM
Could the problems your experiencing be the reason why CIS have put in large red font on the PICED download site that it should not be used on job sites. From experience BETA software is best left on the test bench, not on the job site

Which is why i started my post with 'i know its BETA' and said 'MY garden room' - which is not a job site !!

My home is my test bench :D

Thanks for your advice anyway ;)

Dean.
Dave Byron
25 Apr 05, 10:12 AM
rolecgroup

"Also noticed in PICED that only AUstralia is available in location choice."

assume by locations you mean as used for sunset and sunrise times, lookup either of them in the help file and it gives you a site on web to get lat. and long. data then add to your database.

dave
Richo
25 Apr 05, 02:29 PM
everytime i try to prepare for transfer get this :-

--------------------------------------------------------------------------------
ERROR MESSAGE
--------------------------------------------------------------------------------
Exception 'ERangeError' in module PICED.exe at 0045180B
Range check error

Hi Dean,

Does this happen trying to transfer any project, or just a specific project. If you have more than one PC does the problem occur on that PC as well.
Rolecgroup
25 Apr 05, 05:07 PM
rolecgroup

"Also noticed in PICED that only AUstralia is available in location choice."

assume by locations you mean as used for sunset and sunrise times, lookup either of them in the help file and it gives you a site on web to get lat. and long. data then add to your database.

dave

Hi Dave

Yes that was what i meant - just that with Homegate you get a drop down which includes UK and Towns within UK etc.



Dean.
Rolecgroup
25 Apr 05, 05:10 PM
Hi Dean,

Does this happen trying to transfer any project, or just a specific project. If you have more than one PC does the problem occur on that PC as well.

Havent tried it on any other PC's. this is a fairly fresh Win2k machine.

I initially thought it might be the imported project i was trying, so tried a completly fresh project with nothing but a blank page, and this still caused same problem.

Cant get another PC to a location where it can connect to Cbus :(



Dean.
Darren
26 Apr 05, 05:31 PM
The PICED installer is missing the city database (attached). Unzip this file into the PICED folder.

It is possible that this may fix both of your problems. If not, I will have another look.
Rolecgroup
26 Apr 05, 07:04 PM
Hi Darren

Yes that looks like it may have fixed it.

Tried the prepare file and it didnt crash and was able to show be details.

Only did it from work to home via VNC so wasnt able to physically connect to the CTouch, but looks good.

Any thoughts on why the CTouch only shows up as a PCI which means i cant connect to it via network and only COM1



Thanks



Dean
Darren
27 Apr 05, 03:50 PM
Any thoughts on why the CTouch only shows up as a PCI which means i cant connect to it via network and only COM1
Are you saying that your C-Touch has a unit type of PC_INT ?

Is this a new unit or an old one ?
Rolecgroup
27 Apr 05, 05:04 PM
Hi Darren

Yep - PC-INT, its about a year old now i suppose.




Dean.
Darren
28 Apr 05, 11:18 AM
I will look into it.