IR Elan interface

[chris]

Need C-Bus to send Ir codes to elan Multiroom controller.Ir codes have been learned & modified but Ir unit does not spit out workable codes to Elan controller :confused:

[Frank Mc Alinden]

Hi Chris
Not familiar with the elan stuff but have and use the cbus 2 channel ir transmitter in my setup....Have learned all my codes ok with no major problems....The only issues i had were my lg tv codes which i think are rc5 format would not work properly ...had the same issue with learning via my ha controller.....Also if the high speed serial lead is left connected while testing this will cause the cbus ir unit to do strange things...Would also recommend opto isolating the cbus ir out as its referenced to the cbus network and the ir out must not be grounded ....have put a link to my site if your interested how mine is setup........
http://skybax.rapidhoster.co.uk/~armagh/page64.html

HTH
Frank