Moving single scene

[Dave Byron]

How do i move a single scene from one touch to another touch screen - both on same project??.
save as template seems to save all scenes, just what one.

dave

[Darren]

There is no easy way to do what you are wanting. You could delete all but the required scene, then export the scenes to a template. Make sure you don't save the original project with all of the scenes missing though :D

[Dave Byron]

Darren
Need to move scenes around as when i hit cbus with two ctouchs running two scenes at same time each with 70-80 groups in each scene - seems like cgate looses messages.
This i would expect, so was changing load a bit by combining scenes (up to 100) and putting delays betwwen scenes which fixes the problem.
dave

[Brendan Rogers]

Dear Darren,

At Clever Home automation (http://www.cleverhome.com.au) we also need to be able to export selected scenes from one colour C-Touch to another, both using the same C-Bus project file.

Would you please be able to add in an upcoming PICED release support for exporting all scenes to an intermediate file, then importing selected ones back in from this file to another PICED colour C-Touch project (so the imported scenes can be added to other existing scenes)?

Thanks