Sprinklers

[MPower]

Hi,
I'm having a bit of trouble trying to program our sprinklers at home, we've got 5 seperate zones and unfortunately only one can be run at a time or else the water pressure isn't high enough.
I'm trying to program the Ctouch screen so that i can just press a button once and then each sprinkler will come on for 10 mins but not at the same time. ie Sprinkler 1 comes on for 10 mins then goes off and Sprinkler 2 comes on for 10 mins ect.
Any help with doing this would be greatly appreciated.
Mark

[Dave Byron]

I set up the areas into zones and set schedules to run with start time x minutes apart in the morining and night - then on touch just have boxs for selecting am and pm. One page per zone.
Works well were they got bore pumps and low water pressure.

dave

[Darren]

The new release of the C-Touch software and firmware will have additional features which will simplify what you are trying to do. It won't support the full-blown irrigation controller which HomeGate has though.

And don't ask when... ;)

[Dave Byron]

Are the new features only in the color touch ??
Not BW touch

dave

[Darren]

Colour C-Touch will have the full Irrigation Manager in it.

Black and White C-Touch will have Scene Pulses which will make this sort of thing easier.