Communication between AMX controller with C-Bus

[augustine]

With reference to the above-mentioned matter, kindly advise how i can communicate with CBUS system from AMX controller.

i intent to use the Ethernet Network Interface (Model : E5500CN) connected to the Ethernet Switch where is the AMX Controller connected, please take note i do not intent to put in any PC into the system, hence all the CBUS communication shall be directly from AMX Controller via Ethernet Interface Module with TCP/IP interface instead using C-Gate software driver. Please give me all the technical details in order for me to achieve my goal.

thank you for your kind assistance.


:) :) :) :)

[Newman]

Augustine

Sounds to me like you have got an AMX system on Ethernet and you want to talk directly to the C-Bus network through a CNI but doesn't want to use C-Gate because it requires a PC.

The information you require is available through the C-Bus Enabled program. Please contact C-Bus Enabled and they should be able to help you and determine the best solution for your needs.

http://www.cbus-enabled.com/default.html

[Age]

I dont know how much you know about both systems, but these are some manuals from AMX and C-Bus.

Hope they help.

Vai

[arvid@koduautomaatika.ee]

AMX have an integration ready module for c-bus using E5500CN. Have used it, works ok!