abg
14 Sep 09, 04:15 PM
I have a Panasonic 50" plasma and DVD player, along with Foxtel and a Yahama AMP. I am looking at using a NIRT to issue IR commands (triggered from a multi-sensor using a 5088TX) to control this gear in combination with the normal C-Bus lighting, blinds etc.
Looking in the CIRCA software, there are many devices but there is no easy way to determine if the models I have are supported by the ones in CIRCA. If they're not then it seems the only way to get those codes is to spend ~1K on a reader. This is hard to justify for my own use only.
I've looked at the thread http://www.cbusforums.com/forums/showthread.php?t=911 which explains how to convert from pronto format (excellent thread thank you Will) but it would be a fair bit of work to get all the codes for all the devices converted one code at a time (but it could be done with patience I expect.... :( ) .
Before outlaying for the NIRT I wanted to make sure I'd be able to actually use it to it's full extent.
Many thanks for the feedback.
Looking in the CIRCA software, there are many devices but there is no easy way to determine if the models I have are supported by the ones in CIRCA. If they're not then it seems the only way to get those codes is to spend ~1K on a reader. This is hard to justify for my own use only.
I've looked at the thread http://www.cbusforums.com/forums/showthread.php?t=911 which explains how to convert from pronto format (excellent thread thank you Will) but it would be a fair bit of work to get all the codes for all the devices converted one code at a time (but it could be done with patience I expect.... :( ) .
Before outlaying for the NIRT I wanted to make sure I'd be able to actually use it to it's full extent.
Many thanks for the feedback.