Logic not start

[Dave Byron]

I have a C-Touch that just came back from repair but when I download project(s) into it the logic engine does not start, rebooting does the same thing.

But if I go and start the logic in the CTouch, it runs as designed.

Anything I should check before sending it back to factory again ??

tks
dave

[Darren]

Are you talking about a black and white C-Touch or a colour one?

[Dave Byron]

Darren
colour one.

dave

[Dave Byron]

Darren
Found it goes with some projects and not others - checking further.

I have projects the not changed since the 10/12/08 (and running onsite) that now will not start the logic when loaded into a unit which is running Homegete 4.4.0, I not know the Homegate version onsite.


dave

[Dave Byron]

Darren
Got it it - its the access features in homegate 4.4.0 - if you use the default option in piced the logic does not start.

testing to see what you need to start logic - maybe you can tell me

dave

[Dave Byron]

Darren
When the project is download to the C-touch unit the logic engine does not start, but if I go and change the user "anyone" to have "edit logic" access and reboot the unit the logic engine does start.

dave

[Dave Byron]

Reply from Matty

I have just tried this with CTC version 4.4.0 as well as a recent development build.
The problem exists with version 4.4.0 but not with 4.4.1.x dev build.

Since this has been fixed it will be available in the next public release.
As for when that may be, I'll have to consult some of the other guys next week