B&W Mk II Transfer Error

[Woody]

Have a new Logic B&W Mk II on a job,all has been working well. Changed some logic and tried to update.
Transfer started ok, then about 1/4 the way through data configuration I get a meaage saying transfer error. It has wiped the old program and will not install the new.

We have a problem now!!!!!!!!!

This place is a veterinary Hospital & relies on the touchscreen for XRays etc.

I have tried this latest version of toolkit (v1.10.0) & Piced (v 4.2)
I have also uninstalled the USB drivers & reinstalledafter piced was running.
After a reset of the Touchscreen I can reload the firmware no problems but not the project.

Any help

Shane

[Newman]

Have you tried creating a new blank project and tried downloading that? What are the exact words of the error message that you get when downloading?

[Woody]

It looks like I have answered my own question.

The project file for some reason was corrupt.

I tried saving it under a different name, with the same result.

Fixed the problem by transfering individual sections of the project using templates from original. eg. scenes, pages, logic, etc.

Bug gone.

Just wondering is there something in piced that will verify the project file.

Just to confirm the project worked fine on laptop, but would not complete the transfer.

Comms too unit was fine.

all good :)