PDA

View Full Version : CTouch RS232 programming cable pinouts?

Duncan
22 Jul 08, 02:26 PM
I need to knock up an old B&W CTouch programming cable.. Is it just the standard colour order on the RJ plug? And I'm guesssing its just 2/3 and 5 on the DB9? but what colours?
ashleigh
22 Jul 08, 02:29 PM
There are no standard colours for the wires in an RS-232 cable.

You will need to supply handshaking signals as well (pins 4,5 from memory). They are used to power part of the isolated input circuit.
Duncan
22 Jul 08, 02:33 PM
There are no standard colours for the wires in an RS-232 cable.

You will need to supply handshaking signals as well (pins 4,5 from memory). They are used to power part of the isolated input circuit.

OK, we're closer.. but not quite there.. :)
NickD
22 Jul 08, 02:37 PM
Pinout is in the 5000CT installation instructions (http://www2.clipsal.com/cis/__data/page/428/Monochrome%20Touch%20Screen%20Installation%20Instr uctions2.pdf).

Nick
Duncan
22 Jul 08, 02:55 PM
Pinout is in the 5000CT installation instructions (http://www2.clipsal.com/cis/__data/page/428/Monochrome%20Touch%20Screen%20Installation%20Instr uctions2.pdf).

Nick

Brill! Thanks!
Lucky555
22 Jul 08, 06:35 PM
Dunc,

Would you like me to send you a spare lead ???

If so, PM me with an email address and I will drop you a line to organise.