C-Bus wireless dimmers

[ChrisDeighton]

Hi all,

Does anyone know if the Saturn wireless 2 channel dimmers (eg. E5886D1L2AA) can be used with a single load (thus leaving the second dimming channel disconnected), or must both channels be connected for the device to operate correctly?

The user manuals state that the two channel relay modules require both loads connected, but there is no mention of this for the dimmers.

Any advice gratefully received...!

Regards,

Chris.

[Newman]

Only the 2-Channel Relay unit has this constraint.

The 2-Channel dimmers must have a load connected to Channel 1 but if Channel 2 is not connected then there's no consequences. Leading Edge and Trailing Edge dimmers are both the same in this regard.

[ChrisDeighton]

Thanks Newman, that's exactly what I needed to know!

Regards,

Chris.