quick program

[jacksim]

Hi Gurus,
I'm have a 12 channel relay(5512rvf) and 4 channel dimmer(5504d2a) with E5058NL 8 key-input. Is it possible for me to configure it (quick program) without using c-bus application
Jack

[[IL]NewGen]

try using default manual learning mode:

hold down 1 of the channels on the relay or dimmer you want to program for 10secs, wait until the module begins flashing, learning mode is now enabled;

press a key on the key-input you want to program, then select and press the channel you want to control and see it light up;

then press and and hold the channel again and the module will go back to it's normal state;

now the key input you selected earlier is programmed... :rolleyes:

do the same to all the other keys and you shohuld be right...

[jacksim]

Hi Guru,
Thank you for your help! It works! only thing is we cant control the light(LED) indication.

Jack

[Michael]

learn mode is designed as a crude programming method..... minimal functionality with no computer skills needed.
But remember, you can always come back with a PC and 'jazz' it all up later on....

Michael :D

[jacksim]

:)


thank you..