Oassing messages between PAC , Homegate and CTS

[mikegriff]

One for Darren I think
What is the best way of passing actions between PAC, Homegate and CTS

Assume the PAC has an event and the event should cause say a serial event to happen on Homegate

ie
BIT OF CODE on PAC
Serial port on a HOMEGATE sould "send xx"

I know I could use a group address and then "once group address changes" send "xx"

something tells me I should be using IO

But is this linked between the PAC, Multiple Homegate and CTS

Hope this is clear

thanks again in advance
Mike

[Darren]

The best way to communicate between the applications is to use C-Bus messages. The Trigger Control Application would be the most appropriate for this purpose, but Lighting will work equally well.