Version 3.2 available

[Darren]

Version 3.2 of PICED, HomeGate and Schedule Plus are now available. These are only compatible with ToolKit V1.1.8 (http://www.cbusforums.com/forums/showthread.php?t=1560).

For details of changes, see "What's New" in the respective products.

Included with PICED 3.2 is :

Colour C-Touch upgrade to V3.2
Black and White C-Touch firmware V2.2
PAC firmware V2.2


Installer downloads :

PICED V3.2 Full Install (http://www3.clipsal.com/cis/downloads/HomeGateFamily/PICED_3_2_0_Setup.zip)
HomeGate V3.2 Upgrade (from V3.1) (http://www3.clipsal.com/cis/downloads/HomeGateFamily/HomeGate_3_2_0_Upgrade_Setup.zip)
Schedule Plus V3.2 Upgrade (from V3.1) (http://www3.clipsal.com/cis/downloads/HomeGateFamily/Schedule_Plus_3_2_0_Upgrade_Setup.zip)


For details of software compatibility etc., see CIS Downloads Page (http://www3.clipsal.com/cis/downloads.php3).

[Dave Byron]

Darren
First off this version has a lot of good new features - lock componets etc well done.
Couble of quick questions,

How do i use the - "Added ability to flash selected groups."
and how do you
"Allows import and export to spreadsheets and databases"

can not find the butons or anything in the help file
dave

[Darren]

How do i use the - "Added ability to flash selected groups."
See Flash Group about 3/4 of the way down the Scene Editor help topic.
how do you "Allows import and export to spreadsheets and databases" can not find the butons or anything in the help file
Ah, yes, you won't be able to find that because it got left out of the PICED version of the help file :rolleyes:

This is a feature of the Scene Matrix Manager which is available in PICED and Schedule Plus. An extract from missing page from the help file is below :

Scene Matrix Manager

The Scene Matrix Manager provides an overview of all Scenes and the ability to edit several Scenes at once.

To open the Scene Matrix Manager, click on the Matrix View button on the Scene Manager.

The Scene Matrix Manager shows only the Group Addresses which are used in one or more Scenes.

Alongside each Group Address the level of that Group Address in each Scene is shown. If a Group Address is not used in a particular Scene, the cell will be blank.

The columns can be sorted by clicking on top of the column or they can be rearranged and have their widths changed by dragging them.


Scene Management

Scenes can be managed in a similar way to the Scene Manager :
To add a Scene, click on the Add Scene button or right click on one of the cells and select the Add item
To delete a Scene, select a cell in the Scene column and click the Delete button or right click and select the Delete item
To edit a Scene, select a cell in the Scene column and click the Edit button or right click and select the Edit item
To duplicate a Scene, select a cell in the Scene column and click the Duplicate button or right click and select the Duplicate item

To select a Scene, click on any cell in the Scene column. The selected Scene name will be highlighted.

Selecting Scene Components :
To select a Scene Component, click on a cell in the Scenes grid.
To select additional Scene Components, hold down the CTRL key and click on the other Scene Component cells.
To select all Scene Components in the selected Scene, right click on the Scene Components list and select the Select All in Scene item.
To de-select all Scene Components, right click on the Scenes list and select the De-select All item.

Scene Trigger

To view the trigger for a Scene, hold the mouse over the Scene name cell. A hint will appear with the details of the trigger.

Scene Levels

To change the levels in a Scene :
1. Select the desired Scene Component(s) in the Scenes list
2. Change the level using the spin edit, slider, On and Off buttons or nudge buttons (left and right arrows)
3. Change the ramp rate using the Ramp Rate Combo Box
OR
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Edit item or just double click the item in the list.
3. The Scene Editor will open
4. Enter the desired properties for the Scene Component(s) and click on OK when complete.

To view additional details of a Scene Component (such as ramp rate, or pulse duration), hold the mouse over the Scene Component cell. A hint will appear with the details of the Scene Component.


Adding and Removing Scene Components

To add a Scene Component to a Scene :
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Add Scene Component item

To delete a Scene Component to a Scene :
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Delete Scene Component item


Capturing Scene Levels

It is possible to capture the levels of Scene Components from the C-Bus network and store them in the Scene. To capture the levels for all of the Scene Components, just click on the Capture button or right click on the Scenes list and select the Capture | Capture item.

To capture just some of the Scene Components levels :
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Capture item or right click on the Capture button
3. Select the Capture Selected, Capture Network, Capture Application or Capture Net and App sub item. The meanings of these is discussed below :
Capture Selected : captures just the selected item(s)
Capture Network : captures all Scene Components for the Network selected in the Available Groups panel
Capture Application : captures all Scene Components for the Application selected in the Available Groups panel
Capture Net and App : captures all Scene Components for the Network and Application selected in the Available Groups panel


Setting Scene Levels

It is possible to test the Scene by setting some or all of the Scene levels on C-Bus. To set the whole Scene, click on the Set Scene button or right click on the Scene Components list and select the Set Scene | Set Scene item.

To set just part of a Scene :
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Set Scene item or right click on the Set Scene button
3. Select the Set Scene Levels Immediately, Set Selected or Set Selected Immediately sub item. The meanings of these is discussed below :
Set Scene Levels Immediately : set the whole Scene immediately (do not use the Scene Components' ramp rate)
Set Selected : Set the selected Scene Components using their correct ramp rates
Set Selected Immediately : Set the selected Scene Components to their levels immediately (do not use their ramp rates)

If the Live Changes check box is selected, any changes made to Scene Components will be broadcast onto C-Bus immediately.

To identify a particular Group Address :
1. Select the desired Scene Component(s) in the Scenes list
2. Right click on the Scenes list and select the Flash Group item


Printing Scene Details

To print the Scene matrix, right click on the Scenes list and select the Print item. The Printer Setup allows the selection of the printer.


Importing and Exporting

The data in the Scene Matrix manager can be exported to or imported from a "CSV" format file. These files can be easily used with spreadsheets, databases and other software.

To export the Scene Data :
1. Right click on the Scenes list and select the Export item
2. Enter the file name
3. Click on OK

To import the Scene Data :
1. Right click on the Scenes list and select the Import item
2. Click on the Yes button
3. Select the file name
4. Click on OK

[Dave Byron]

Darren
got it did not try right clicking, can you make the sheet name = project name from priced ?? then with multiple screens I can tell which screen they came from

dave

[Dave Byron]

Darren
In the scene matrix can we have an option to but in all groups even if they are not used in a scene for 2 reasons,
1 Lets me check that i have left a group out of scenes
2 I want to give the user a sheet that has all groups and scene names and get then to fill in which groups they want in each scene. Then i will import to piced.



dave