nos

[james katsikas]

Hi guys

I want to transfer my 1.2 version c touch projects to the new Piced software

I have copied all the jobs to the projects folder in toolkit and Piced but every

time i open a job i get ( error reading file) & (error connecting to c gate)

[Richo]

Hi guys

I want to transfer my 1.2 version c touch projects to the new Piced software

I have copied all the jobs to the projects folder in toolkit and Piced but every

time i open a job i get ( error reading file) & (error connecting to c gate)

Hi James,

What is a "job" and where exactly did you copy it from and to? (Full directory path thanks).

What operating system are you running? (Windows 98/98SE/ME/2000/XP/2003).

What does open a job mean? Can you provide step by step instructions?

Ignoring PICED, does Toolkit start and operate as you expect? (E.g. create projects, scan networks etc..)

[Phil.H]

Hi guys

I want to transfer my 1.2 version c touch projects to the new Piced software

I have copied all the jobs to the projects folder in toolkit and Piced but every

time i open a job i get ( error reading file) & (error connecting to c gate)
Jim,

I have had a look at the PICED software for the question you have.
When you run PICED you will be presented with the "Project Details Wizard" - select the opton "Open Existing Project" - then you will need to "Browse" your folders to point the software to where your C-Touch 1.2 file {.xml} is.
Remember you should have imported the relevant C-Bus file from V2 into Toolkit (1.1.6)

You will be prompted to connect the PICED program to the Toolkit version of the C-Bus project.

When you save the project I think you will be prompted to save it in the new format???

Give it a go and give me a call. (Remind me what I have typed here)

Go Ambrose !

[Darren]

I want to transfer my 1.2 version c touch projects to the new Piced software
You don't need to "transfer" the projects as such. PICED will read the old files.

I have copied all the jobs to the projects folder in toolkit and Piced but every time i open a job i get ( error reading file) & (error connecting to c gate)
Not sure what you mean by "jobs".
Before you can use PICED with a C-Touch Configuration Software project, you will need to :
- Install latest ToolKit (to get a compatible version of C-Gate)
- Using the ToolKit, import your V2 C-Bus projects
- THEN run PICED.